PH: 1-705-745-2961
TF: 1-800-295-0509
 |
|
|
The Eliminator Gantry Machining Center
In the metal cutting industry time is at a premium; set-up and processing challenges can make or break you. You need a machine that is as committed to your deadlines as you are. The Eliminator minimizes time spent on set-up and breezes through even the biggest parts with time to spare. Built with one idea in mind: to not just machine the largest and toughest parts your industry demands but machine them with ease. With numerous configurations available, the Eliminator can meet virtually any machining requirement. With its powerful and versatile spindle options, multiple table size configurations and variety of automated options available, the Eliminator is the machine of choice when you need performance, and lots of it. Don’t just meet your deadlines, ELIMINATE them.
 |
 |
 |
|
|
The Annihilator Gantry Machining Center
This is not your run of the mill machining center, this is the metal chewing, tough as nails Annihilator Gantry. The Annihilator was designed with one thought in mind: to deliver over-the-top performance to not just set you apart from your competitors. To ANNIHILATE them. With the speed and precision of a fighter jet and the power and strength of a freight train, the Annihilator can handle anything you throw at it. The rigid gantry design combined with our high speed axis drive system allows for faster processing times, allowing you to process your parts with ease. The Annihilator is not for those who are content with ‘good enough’, it’s for those who understand the true value of performance; for those who want the job done right.
|
|
 |
 |
|
|
The Quickdrill III Gantry Drilling Center
Three times the spindles equals three times the productivity. Quickmill is renowned for raising the bar in the heat transfer industry; with superior performance and faster production times being boasted by our customers for decades. Now it’s time to raise the bar again. Introducing the Quickdrill III, the triple spindle drilling machine that is revolutionizing the heat transfer industry.
With the ability to finish parts three times faster than the competition, the Quickdrill III will eliminate all drilling bottlenecks and drastically decrease your finished product completion time. The standard triple spindle, Quickcode III processing software, high pressure coolant system and rigid gantry design all add up to a game changing machine that will significantly set you apart from your competition.
|
 |
|
|
The Intimidator Gantry Machining Center
Chances are if you’re talking about drilling, the Intimidator name will be part of the conversation. For the last 10 years the Intimidator has become the benchmark in drilling performance, with customers all over the world boasting faster production times, higher efficiencies and more workload capabilities. To put it simply, the Intimidator is a metal hungry drilling powerhouse.
Whether you’re producing plates, beams, tubes, blades or anything else that needs a ton of holes, the Intimidator has been the machine of choice for years. With a 75 hp (56 kW) direct drive spindle, powerful Fanuc controls, 30” (762 mm) Z axis stroke, and rigid gantry style construction, you’ll be amazed at your productivity increases.
|
 |
 |
|
|
The Eliminator R Rail Machining Center
Think big. Think really big. The Eliminator R is the ultimate machining center for large part production. With extreme rigidity, ample power and multiple automatic heads, the Eliminator R is the perfect solution to your big, awkward part processing needs. With the capability to load, unload and set up parts all at floor level, you’ll be able to machine parts in a fraction of the time compared to other machining centers. The only thing you’ll have to worry about is making sure the rest of your shop can keep up. Whether your parts are huge, gargantuan or monstrous, ELIMINATE your production concerns with the Eliminator R rail machining center.
|
 |
|
|
|
|
The Excalibur Bridge Machining Center
When Quickmill introduced its first drilling machine over 30 years ago, it was designed with one purpose in mind: drilling holes, lots and lots of holes, in parts 60 inches and under. Over the years Quickmill’s focus has shifted to developing some of the biggest, most impressive, large part machining centers on the market. It’s time to revisit our roots. Designed to fill a demand for smaller part drilling in the heat transfer and structural steel industries, the Excalibur gives you the drilling performance our customers have come to expect from Quickmill, without breaking the bank.
Turnkey Machines |
|
|
If you need more than just a machine to satisfy your production needs, Quickmill has your solution. We will provide not only the right machine, but the full turnkey solution for your specific requirement. With our experience in large machine and turnkey systems we have the resources to meet your manufacturing needs.
|
 |
Custom Machines |
|
|
If a standard Quickmill machine is not the best solutions for your application, Quickmill will work closely with you to custom-build job specific machines to solve your requirements. Quickmill incorporates standard machine components, such as spindles, drives, controls, etc. so that a “custom” machine that can be serviced as easily as a standard machine for many years to come.
|
|
 |
